Description of Product
In order to meet the using requirements of aluminum tube and ensure the content of aluminum tube is effectively isolated from aluminum, a protective film with stable chemical properties must be sprayed on the inner wall of the aluminum tube. The general coating material is epoxy resin, so this machine is called the inner lacquering machine.
The germ tube output by the annealing oven goes through the conveyor chain and falls into the inlet tube slot and be sent into the rotating cup of spraying machine by. The Fuckson indexer drives the turntable, then the rotating cup enter into the spraying station. The six spraying guns are fixed on the roller, and the gun moves back and forth with the roller while swinging from side to side with the tube chain to complete a working cycle. The gun cycles back and forth, with the tube chain passing through two rotating cups. The single spraying gun sprays every other tube. As a result, each aluminum tube was sprayed three times. In addition, each spraying gun is separately controlled, and the spraying procedure can be set according to user requirements.
When this process is completed, the aluminum tube enters the curing oven along with the transfer chain.
Technical parameterWuxi Yingrun Machinery Technology Co., Ltd.
Add.: 486-1-704 Qianqiao Street, Huishan District, Wuxi City, Jiangsu Province
Contacts: Tiger Jing
Tel.: +86-510-83202069